I have created a Windows 2016 hyper-v failover cluster with 2 no hypervisors (soon to be 3) and a NAS for storage.
Each hypervisor has 4 NICs so I used 2 of the NICs for MPIO iSCSI and the other 2 NICs I created an LACP team to our Cisco switches. I have one external vswitch that is configured with the team logical adapter.
The team is also a trunk link so I can pass mutiple vlans on it and it currently has a management vlan for the hypervisor physical IPs and a client traffic vlan, see pics below -
So my questions are -
1) Is what I have enough for it to work properly or should I be looking to have additional networks for live migration, cluster communication etc.
2) If I do need extra networks how exactly do I go about creating them ie. I can add any number of vlans I want to the team/virtual switch but how do I then get FCM to see and use them.
3) If 2) can I add additional networks without any downtime or at least one hypervisor at a time so I can drain roles to the other etc.
I have a horrible feeling I may need to rebuild the cluster to get this setup optimally.
Any pointers would be much appreciated.