Im having some issues and Supermicro customer support is not being very helpful. Anyone have any thoughts on this.
Please see below:
I have a SC846e1:MB: X8DTE-F
PR: x5660 (2)
Mem: 32gig Samsung EEC 1333
Raid: adaptec 6805 (slot 4)
OS:Samsung 850pro SSD (2) (direct to the raid card, raid 1)
Files: HGST 3tb NAS (6) (enhanced JBOD) (using StableBit BD to pool)
I am trying to enable Hyper-V on a new build with Server 2012r2. I have added the role and it caused a boot loop which I found to be due to having "execute-disable bit capability" enabled. I disabled this and it booted up but hypervisor will not start and states that virtualization andexecute-disable must be turned on.
I have reset the bios to "optimal defaults" and have only changed: (did a complete power off to validate change)
- numlock: disabled
- execute-disabled: disabled (due to boot loop)
- IPMI: configured
There is also a mention in the error for hypervisor not starting that states thatvt-d and trusted execution must be disabled.
VT-D: is confirmed to be disabled
Trusted execution: cannot be found which i believe is TPM which is not showing up in he bios and while looking at the manual and board can only find a TPM header but no jumper to disable it as per the instructions in the manual. (Manual states to disable TPM with a jumper)
Is TPM what is causing my issue? and causing the boot loop when execute-disabled enabled?
Also checked boot loader and hypervisorlaunchtype: Auto
Any assistance you can provide would be greatly appreciated