Hi there,
I have an issue with TMG 2010 on Hyper-V 2012 - the Setup:
- Windows 2012 Hyper-V
- TMG 2010 SP2 Rollup 4 running on W2K8 R2
TMG 2010 (Array Node1) Network
Internal Interface: 10.0.0.10/24 (Route to 192.168.11.0/24 over 10.0.0.1)
IntraArray: 192.168.10.10/24
Perimeter: 10.0.60.10/24 GW 10.0.60.100
TMG 2010 (Array Node2) Network
Internal Interface: 10.0.0.11/24 (Route to 192.168.11.0/24 over 10.0.0.1)
IntraArray: 192.168.10.11/24
Perimeter: 10.0.60.11/24 GW 10.0.60.100
Domain Controllers:
192.168.11.10
192.168.11.11
The NICs of the TMG VMs are configured with the correct VLANs and on the Perimeter Interface as well as on the Internal Interface I activate MAC Address Spoofing.
Once I activate NLB on the Perimeter Interface all works fine. But NLB on the internal Interface does not work - I see that NLB got configured on Array Node 1 but the second one does not get the config nor is able to sync it´s configuration with Array Node 1. ALso the Servers are not able to communicate with the Domain Controllers anymore. Once I deactivate MAC Address Spoofing on the internal Interface and remove NLB the Server are able to speak to the Domain Controllers...
Any suggestions?